{"title":"American Controls","description":"","products":[{"product_id":"dcn100-1-5","title":"American Controls DCN100-1.5, Low Voltage DC Drive, 12 Vac Input, 0-12 Vac Output, 1\/100-1\/60 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eDCN100-1.5, Low Voltage DC Drive, 12 Vac Input, 0-12 Vac Output, 1\/100-1\/60 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe DCN series of drives are reliable low voltage drives that provide both speed control and current limiting in low HP applications. Roughly the size of a quarter, these drives are being implemented in applications in which the customer traditionally powers the motor directly off a power supply or battery, which doesn’t allow for control or protection of the motor. The drive allows the OEM speed control of their motor, but also provides a current limit trim pot to protect the motor in the case of an overload or jam.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663968403778,"sku":"DCN100-1.5","price":94.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/0000132_dcn100-15-low-voltage-motor-control_400.jpg?v=1766416256"},{"product_id":"dcn200-1-5","title":"American Controls DCN200-1.5, Low Voltage DC Drive, 24 Vac Input, 0-24 Vac Output, 1\/50-1\/30 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eDCN200-1.5, Low Voltage DC Drive, 24 Vac Input, 0-24 Vac Output, 1\/50-1\/30 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe DCN series of drives are reliable low voltage drives that provide both speed control and current limiting in low HP applications. Roughly the size of a quarter, these drives are being implemented in applications in which the customer traditionally powers the motor directly off a power supply or battery, which doesn’t allow for control or protection of the motor. The drive allows the OEM speed control of their motor, but also provides a current limit trim pot to protect the motor in the case of an overload or jam.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663968436546,"sku":"DCN200-1.5","price":94.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/0000132_dcn100-15-low-voltage-motor-control_400_1.jpg?v=1766416257"},{"product_id":"dcn300-16-low-voltage-dc-drive-24-vac-input-0-12-vac-output-1-20-1-5-hp-open-chassis-pmdc-brushed-motors","title":"American Controls DCN300-16, Low Voltage DC Drive, 24 Vac Input, 0-12 Vac Output, 1\/20-1\/5 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eDCN300-16, Low Voltage DC Drive, 24 Vac Input, 0-12 Vac Output, 1\/20-1\/5 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe DCN300 and DCN600 Series of drives are the perfect fit for battery powered or mobile applications as they are able to maintain variable speed control as the battery discharges. This results in an increase in running time of battery-operated equipment. The drives include an inhibit for remote starting and stopping, a power LED, and trim pot adjustments for minimum speed, maximum speed, acceleration, IR compensation, and current limit. These UL approved DC-to-DC drives come with an extruded chassis for better heat sinking transfer, more bus capacitance to handle ripple currents, and an oversized terminal block that can handle high currents. With a 1% speed regulation over a an 80:1 speed range, these drives are the perfect solution for low voltage DC-to-DC applications with no braking or reversing requirements.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663968469314,"sku":"DCN300-16","price":468.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/300-16.jpg?v=1766416257"},{"product_id":"dcn300-6","title":"American Controls DCN300-6, Low Voltage DC Drive, 24 Vac Input, 0-12 Vac Output, 1\/50-1\/15 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eDCN300-6, Low Voltage DC Drive, 24 Vac Input, 0-12 Vac Output, 1\/50-1\/15 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe DCN series of drives are reliable low voltage drives that provide both speed control and current limiting in low HP applications. Roughly the size of a quarter, these drives are being implemented in applications in which the customer traditionally powers the motor directly off a power supply or battery, which doesn’t allow for control or protection of the motor. The drive allows the OEM speed control of their motor, but also provides a current limit trim pot to protect the motor in the case of an overload or jam\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663968567618,"sku":"DCN300-6","price":207.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/0000134_dcn300-6-low-voltage-motor-control_400.jpg?v=1766416258"},{"product_id":"dcn300-60-low-voltage-dc-drive-24-vac-input-0-12-vac-output-1-25-1-3-hp-open-chassis-pmdc-brushed-motors","title":"American Controls DCN300-60, Low Voltage DC Drive, 24 Vac Input, 0-12 Vac Output, 1\/25-1\/3 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eDCN300-60, Low Voltage DC Drive, 24 Vac Input, 0-12 Vac Output, 1\/25-1\/3 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe DCN300 and DCN600 Series of drives are the perfect fit for battery powered or mobile applications as they are able to maintain variable speed control as the battery discharges. This results in an increase in running time of battery-operated equipment. The drives include an inhibit for remote starting and stopping, a power LED, and trim pot adjustments for minimum speed, maximum speed, acceleration, IR compensation, and current limit. These UL approved DC-to-DC drives come with an extruded chassis for better heat sinking transfer, more bus capacitance to handle ripple currents, and an oversized terminal block that can handle high currents. With a 1% speed regulation over a an 80:1 speed range, these drives are the perfect solution for low voltage DC-to-DC applications with no braking or reversing requirements.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663968600386,"sku":"DCN300-60","price":586.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/300-60.jpg?v=1766416260"},{"product_id":"acf700-0-65","title":"American Controls ACF700-0.65, Line Voltage AC Drive, 115\/230 Vac Input, 0-12 Vac Output, 1\/60-1\/16 Hp, Open Chassis, Variable Frequency AC Drive","description":"\u003cp\u003eACF700-0.65, Line Voltage AC Drive, 115\/230 Vac Input, 0-12 Vac Output, 1\/60-1\/16 Hp, Open Chassis, Variable Frequency AC Drive\u003c\/p\u003e\n\n\u003cp\u003eThe ACF series is a microprocessor based variable frequency drive. The user adjustable trim pots allow the user to setup the drive similar to a DC motor control, meaning quick and easy installation without any of the programming typically associated with VFDs. ACF series drives control 115 or 230 VAC motors, single or three phase, with either a 115 or 230 VAC single phase input. This is because the ACF drive is equipped with a voltage doubling capability that allows you to run a 230 VAC motor when only a 115 VAC single phase power is available. The drive’s internal carrier frequency can easily be changed from 16kHz to 1.6kHz to minimize switching losses or reduce electrical interference. Stopping methods include coast to stop or DC injection braking. Incorporated into the design is a microprocessor which provides flexibility of creating custom programs that can include specific user setting for OEM applications. These full featured and compact AC drives are the perfect choice to run any 3 phase and some single phase motors.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663968633154,"sku":"ACF700-0.65","price":187.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/acf700-065.jpg?v=1766416261"},{"product_id":"acf700-2-4","title":"American Controls ACF700-2.4, Line Voltage AC Drive, 115\/230 Vac Input, 115 Vac Output, 1\/60-1\/16 Hp, Open Chassis, Variable Frequency AC Drive","description":"\u003cp\u003eACF700-2.4, Line Voltage AC Drive, 115\/230 Vac Input, 115 Vac Output, 1\/60-1\/16 Hp, Open Chassis, Variable Frequency AC Drive\u003c\/p\u003e\n\n\u003cp\u003eThe ACF series is a microprocessor based variable frequency drive. These drives look and act like DC drives, meaning quick and easy setup without any programming. These drives are equipped with user adjustable trim pots to set Max. Speed, Min. Speed, Slip Comp, Boost, TQ Limit, Accel and Decel \/ Injection Braking parameters. ACF700 drives allow a 115 or 230 VAC input with a 115 or 230 VAC out, independent of the input potential. This is because the ACF700 is equipped with a unique voltage doubling capability that allows you to run a 230 VAC motor when only a 115 VAC single phase power is available. While the input is single phase, the output can be single or three phase. The drive’s internal carrier frequency can easily be changed from 16kHz to 1.6kHz to minimize switching losses or reduce electrical interference. Stopping methods include coast to stop or DC injection braking. Incorporated into the design is a microprocessor which provides flexibility of creating custom programs that can include specific user setting for OEM applications. These full featured and compact AC drives are the perfect choice to run any 3 phase, and some single phase motors, rated at 4 amps or below.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663968665922,"sku":"ACF700-2.4","price":301.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/acf700-24.jpg?v=1766416262"},{"product_id":"acf700-4-line-voltage-ac-drive-115-230-vac-input-115-230-vac-output-1-8-1-2-hp-open-chassis-variable-frequency-ac-drive","title":"American Controls ACF700-4, Line Voltage AC Drive, 115\/230 Vac Input, 115\/230 Vac Output, 1\/8-1\/2 Hp, Open Chassis, Variable Frequency AC Drive","description":"\u003cp\u003eACF700-4, Line Voltage AC Drive, 115\/230 Vac Input, 115\/230 Vac Output, 1\/8-1\/2 Hp, Open Chassis, Variable Frequency AC Drive\u003c\/p\u003e\n\n\u003cp\u003eThe ACF series is a microprocessor based variable frequency drive. These drives look and act like DC drives, meaning quick and easy setup without any programming. These drives are equipped with user adjustable trim pots to set Max. Speed, Min. Speed, Slip Comp, Boost, TQ Limit, Accel and Decel \/ Injection Braking parameters. ACF700 drives allow a 115 or 230 VAC input with a 115 or 230 VAC out, independent of the input potential. This is because the ACF700 is equipped with a unique voltage doubling capability that allows you to run a 230 VAC motor when only a 115 VAC single phase power is available. While the input is single phase, the output can be single or three phase. The drive’s internal carrier frequency can easily be changed from 16kHz to 1.6kHz to minimize switching losses or reduce electrical interference. Stopping methods include coast to stop or DC injection braking. Incorporated into the design is a microprocessor which provides flexibility of creating custom programs that can include specific user setting for OEM applications. These full featured and compact AC drives are the perfect choice to run any 3 phase, and some single phase motors, rated at 4 amps or below.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663968698690,"sku":"ACF700-4","price":448.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/0000242_acf700-4-ac-motor-control_400_d5bf507f-87f6-4429-86d3-478de727cee1.jpg?v=1766416263"},{"product_id":"act700-10-line-voltage-ac-drive-115-230-vac-input-0-230-output-1-2-1-hp-open-chassis-variable-frequency-ac-drive","title":"American Controls ACT400-10, Line Voltage AC Drive, 115\/230 Vac Input, 0-230 Output, 1\/2-1 Hp, Open Chassis, Variable Frequency AC Drive","description":"\u003cp\u003eACT700-10, Line Voltage AC Drive, 115\/230 Vac Input, 0-230 Output, 1\/2-1 Hp, Open Chassis, Variable Frequency AC Drive\u003c\/p\u003e\n\n\u003cp\u003eThe ACT series drive delivers the features and benefits of a microprocessor based drive and the low cost of a triac control. The ACT output is a variable voltage with a constant frequency, making it perfect for a small speed range control of a single phase AC motor, such as a permanent split capacitor (PSC), shaded pole, synchronous, and universal motors. Unlike other common triac drives, the ACT series drive takes advantage of single phase motor characteristics to provide approximately constant pressure in filtered fan applications, meaning as a filter becomes clogged, the motor will speed up to maintain airflow. The ACT series drive also has an internal closed loop circuit meaning the drive can maintain motor voltage during AC line sags or swells. It also accepts feedback in the form of a thermistor or voltage signal to create a PI loop.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663968764226,"sku":"ACT400-10","price":355.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/act400-10.jpg?v=1766416264"},{"product_id":"dcn600-60-low-voltage-dc-drive-48-vac-input-0-48-vac-output-1-2-1-3-hp-open-chassis-pmdc-brushed-motors","title":"American Controls DCN600-60, Low Voltage DC Drive, 48 Vac Input, 0-48 Vac Output, 1\/2-1\/3 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eDCN600-60, Low Voltage DC Drive, 48 Vac Input, 0-48 Vac Output, 1\/2-1\/3 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe DCN300 and DCN600 Series of drives are the perfect fit for battery powered or mobile applications as they are able to maintain variable speed control as the battery discharges. This results in an increase in running time of battery-operated equipment. The drives include an inhibit for remote starting and stopping, a power LED, and trim pot adjustments for minimum speed, maximum speed, acceleration, IR compensation, and current limit. These UL approved DC-to-DC drives come with an extruded chassis for better heat sinking transfer, more bus capacitance to handle ripple currents, and an oversized terminal block that can handle high currents. With a 1% speed regulation over a an 80:1 speed range, these drives are the perfect solution for low voltage DC-to-DC applications with no braking or reversing requirements.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663968993602,"sku":"DCN600-60","price":586.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/300-60_1_fdc1822d-4a26-414e-869b-52aeb13885cf.jpg?v=1766416265"},{"product_id":"dcr300-120-low-voltage-dc-drive-24-vac-input-0-12-vac-output-1-6-1-12-hp-open-chassis-pmdc-brushed-motors","title":"American Controls DCR300-120, Low Voltage DC Drive, 24 Vac Input, 0-12 Vac Output, 1\/6-1\/12 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eDCR300-120, Low Voltage DC Drive, 24 Vac Input, 0-12 Vac Output, 1\/6-1\/12 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe DCR series are microprocessor based, low voltage PWM drives that are capable of braking and reversing regeneratively. The microprocessor allows for custom programming to fit any OEMs custom needs, sometimes eliminating the need for a PLC and\/or sensors. They can even be programmed for use in the field without trimmer potentiometers, creating a simple install and a level of security for OEMs. Some models contain a “sleep mode” which extends battery life, and some contain a Fault LED with a built in flashing code for under voltage, over voltage, current limit, overheat, and short circuit. With features like pre-charge circuits, brake outputs, directionally based inhibits, you’re sure to find a drive to fit your needs.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969026370,"sku":"DCR300-120","price":741.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/dcr300-120.jpg?v=1766416267"},{"product_id":"dch401-5-lfb-low-voltage-dc-drive-24-vac-input-0-24-vac-output-1-25-1-8-hp-open-chassis-pmdc-brushed-motors","title":"American Controls DCH401-5-LFB, Low Voltage DC Drive, 24 Vac Input, 0-24 Vac Output, 1\/25-1\/8 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eDCH401-5-LFB, Low Voltage DC Drive, 24 Vac Input, 0-24 Vac Output, 1\/25-1\/8 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe DCH401-5-LFB is a modified version of our DCH401-5 for linear positioning applications. It is designed to take in a resistive feedback signal that the drive uses to compare with a commanded position signal, which the drive will then act on to move the motor forward or reverse until the two signals match. The control can be accurate to within 1\/1000th of commanded position.\u003c\/p\u003e\n\n\u003cp\u003eThe DCH series combines an AC to DC switching power supply with a regenerative PWM drive, creating an all in one solution to applications requiring control of 12 or 24 VDC motors when only 115 or 230 VAC power is available. The microprocessor design allows the drive to be programmed for custom applications or routines to meet an OEMs needs. With an isolated front end, this series is compatible with a 0-5 or 0-10 VDC analog from any PLC.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969059138,"sku":"DCH401-5-LFB","price":505.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/dch401-5-lfb.jpg?v=1766416268"},{"product_id":"lgc400-1-5","title":"American Controls LGC400-1.5, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/10-1\/4 Hp, Open Chassis, Field Wound Brushed Motors","description":"\u003cp\u003eLGC400-1.5, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/10-1\/4 Hp, Open Chassis, Field Wound Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe LGC series is our most widely used series for general purpose 90\/180 VDC brushed DC motor applications. This compact, non-filtered SCR drive series offers many user friendly adjustments. With the use of the on-board trim pots you can quickly set maximum speed, acceleration rate, deceleration rate, current limit, speed regulation, and minimum speed of your motor. With abilities to accept 115 or 230 VAC single phase power, run permanent magnet or field-wound motors, the LGC series can easily satisfy most of your motor driving needs.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969091906,"sku":"LGC400-1.5","price":183.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/lgc400-15_469cde35-f713-4d1c-9dfc-888ad9135e3c.jpg?v=1766416269"},{"product_id":"lgc400-1-5-qdt","title":"American Controls LGC400-1.5-QDT, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/10-1\/4 Hp, Open Chassis, Field Wound Brushed Motors.","description":"\u003cp\u003eLGC400-1.5-QDT, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/10-1\/4 Hp, Open Chassis, Field Wound Brushed Motors.\u003c\/p\u003e\n\n\u003cp\u003eThe LGC series is our most widely used series for general purpose 90\/180 VDC brushed DC motor applications. This compact, non-filtered SCR drive series offers many user friendly adjustments. With the use of the on-board trim pots you can quickly set maximum speed, acceleration rate, deceleration rate, current limit, speed regulation, and minimum speed of your motor. With abilities to accept 115 or 230 VAC single phase power, run permanent magnet or field-wound motors, the LGC series can easily satisfy most of your motor driving needs.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969124674,"sku":"LGC400-1.5-QDT","price":238.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/lgc400-15-qdt.jpg?v=1766416270"},{"product_id":"lgc400-10-low-voltage-dc-drive-230-vac-input-0-180-vac-output-1-4-1-2-hp-open-chassis-field-wound-brushed-motors","title":"American Controls LGC400-10, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/4-1\/2 Hp, Open Chassis, Field Wound Brushed Motors.","description":"\u003cp\u003eLGC400-10, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/4-1\/2 Hp, Open Chassis, Field Wound Brushed Motors.\u003c\/p\u003e\n\n\u003cp\u003eThe LGC series is our most widely used series for general purpose 90\/180 VDC brushed DC motor applications. This compact, non-filtered SCR drive series offers many user friendly adjustments. With the use of the on-board trim pots you can quickly set maximum speed, acceleration rate, deceleration rate, current limit, speed regulation, and minimum speed of your motor. With abilities to accept 115 or 230 VAC single phase power, run permanent magnet or field-wound motors, the LGC series can easily satisfy most of your motor driving needs.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969157442,"sku":"LGC400-10","price":187.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/lgc400-15-qdt_1_0db12d66-d7e0-4f87-89b1-c1587d977300.jpg?v=1766416271"},{"product_id":"lgc400-10-qdt-line-voltage-dc-drive-230-vac-input-0-180-vac-output-1-4-1-2-hp-open-chassis-field-wound-brushed-motors","title":"American Controls LGC400-10-QDT, Line Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/4-1\/2 Hp, Open Chassis, Field Wound Brushed Motors.","description":"\u003cp\u003eLGC400-10-QDT, Line Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/4-1\/2 Hp, Open Chassis, Field Wound Brushed Motors.\u003c\/p\u003e\n\n\u003cp\u003eThe LGC series is our most widely used series for general purpose 90\/180 VDC brushed DC motor applications. This compact, non-filtered SCR drive series offers many user friendly adjustments. With the use of the on-board trim pots you can quickly set maximum speed, acceleration rate, deceleration rate, current limit, speed regulation, and minimum speed of your motor. With abilities to accept 115 or 230 VAC single phase power, run permanent magnet or field-wound motors, the LGC series can easily satisfy most of your motor driving needs.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969222978,"sku":"LGC400-10-QDT","price":243.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/lgc400-15-qdt_1_1.jpg?v=1766416272"},{"product_id":"iso101-8-ac-line-voltage-115-230-vac-input-10-vac-output-1-50-1-30-hp-open-chassis-unidirectional","title":"American Controls ISO101-8, AC Line Voltage, 115\/230 Vac Input, 10 Vac Output, 1\/50-1\/30 Hp, Open Chassis, Unidirectional.","description":"\u003cp\u003eISO101-8, AC Line Voltage, 115\/230 Vac Input, 10 Vac Output, 1\/50-1\/30 Hp, Open Chassis, Unidirectional.\u003c\/p\u003e\n\n\u003cp\u003eThe ISO101-8 is an 8-channel isolation module designed to accept one analog signal while providing eight independently isolated analog outputs. It can work with voltage ranges from 0-5, 0-10, 0-250 VDC, or a 4-20 mA current signal. Each output can easily be scaled to any voltage between 0-10 VDC with on-board high precision multi-turn trim pots. With the addition of an external potentiometer, you can also setup the ISO101-8 to run in a master\/ratio mode. This versatile card is the perfect solution to control several devices with one control signal while eliminating the need to add individual input isolation.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969255746,"sku":"ISO101-8","price":590.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/iso101-8_b9e24332-a50e-447a-bba1-4544b8ff30b0.jpg?v=1766416272"},{"product_id":"iso202-1-ac-line-voltage-115-230-vac-input-10-vac-output-1-50-1-30-hp-open-chassis-bidirectional","title":"American Controls ISO202-1, AC Line Voltage, 115\/230 Vac Input, 10 Vac Output, 1\/50-1\/30 Hp, Open Chassis, Bidirectional.","description":"\u003cp\u003eISO202-1, AC Line Voltage, 115\/230 Vac Input, 10 Vac Output, 1\/50-1\/30 Hp, Open Chassis, Bidirectional.\u003c\/p\u003e\n\n\u003cp\u003eThe ISO202-1 is a stand alone isolation card designed to work with any of the American Control Electronics products that can accept a remote analog signal for control. Any application that involves controling a motor drive with a remote analog signal requires isolation. The isolation can be at the signal source, such as in a PLC, or it can be on the drive end. Some American Control Electronics families always have isolation by default, others have isolation as an option that must be populated at the factory, and a few have an adder board that can be installed remotely in the field after initial installation. For all other drives, the ISO202-1 is a necessary component to achieve remote analog control.\u003c\/p\u003e\n\n\u003cp\u003ePowered by a 115 or 230 VAC single phase power source, the ISO202-1 can accept any DC voltage signal between -250 to +250 VDC, or a current signal of either a 1-5, 4-20, or 10-50 mA range. The ISO202-1 converts any of those analog input signal ranges into an isolated -12 to +12 VDC range @ 10 mA with a 0.01% linearity. High resolution multi-turn trim pots can be used to scale that output range to match the required input of any American Control Electronics control.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969288514,"sku":"ISO202-1","price":345.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/iso202-1.jpg?v=1766416273"},{"product_id":"dcr300-30-low-voltage-dc-drive-24-vac-input-0-24-vac-output-1-25-1-3-hp-open-chassis-pmdc-brushed-motors","title":"American Controls DCR300-30, Low Voltage DC Drive, 24 Vac Input, 0-24 Vac Output, 1\/25-1\/3 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eDCR300-30, Low Voltage DC Drive, 24 Vac Input, 0-24 Vac Output, 1\/25-1\/3 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe DCR series are microprocessor based, low voltage PWM drives that are capable of braking and reversing regeneratively. The microprocessor allows for custom programming to fit any OEMs custom needs, sometimes eliminating the need for a PLC and\/or sensors. They can even be programmed for use in the field without trimmer potentiometers, creating a simple install and a level of security for OEMs. Some models contain a “sleep mode” which extends battery life, and some contain a Fault LED with a built in flashing code for under voltage, over voltage, current limit, overheat, and short circuit. With features like pre-charge circuits, brake outputs, directionally based inhibits, you’re sure to find a drive to fit your needs.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969321282,"sku":"DCR300-30","price":377.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/dcr300-30.jpg?v=1766416274"},{"product_id":"dcr300-250-low-voltage-dc-drive-24-vac-input-0-24-vac-output-1-3-3-hp-open-chassis-pmdc-brushed-motors","title":"American Controls DCR300-250, Low Voltage DC Drive, 24 Vac Input, 0-24 Vac Output, 1\/3-3 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eDCR300-250, Low Voltage DC Drive, 24 Vac Input, 0-24 Vac Output, 1\/3-3 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe DCR series are microprocessor based, low voltage PWM drives that are capable of braking and reversing regeneratively. The microprocessor allows for custom programming to fit any OEMs custom needs, sometimes eliminating the need for a PLC and\/or sensors. They can even be programmed for use in the field without trimmer potentiometers, creating a simple install and a level of security for OEMs. Some models contain a “sleep mode” which extends battery life, and some contain a Fault LED with a built in flashing code for under voltage, over voltage, current limit, overheat, and short circuit. With features like pre-charge circuits, brake outputs, directionally based inhibits, you’re sure to find a drive to fit your needs.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969354050,"sku":"DCR300-250","price":1200.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/dcr300-250_1.jpg?v=1766416275"},{"product_id":"dcr300-20-low-voltage-dc-drive-24-vac-input-0-24-vac-output-1-40-1-4-hp-open-chassis-pmdc-brushed-motors","title":"American Controls DCR300-20, Low Voltage DC Drive, 24 Vac Input, 0-24 Vac Output, 1\/40-1\/4 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eDCR300-20, Low Voltage DC Drive, 24 Vac Input, 0-24 Vac Output, 1\/40-1\/4 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe DCR series are microprocessor based, low voltage PWM drives that are capable of braking and reversing regeneratively. The microprocessor allows for custom programming to fit any OEMs custom needs, sometimes eliminating the need for a PLC and\/or sensors. They can even be programmed for use in the field without trimmer potentiometers, creating a simple install and a level of security for OEMs. Some models contain a “sleep mode” which extends battery life, and some contain a Fault LED with a built in flashing code for under voltage, over voltage, current limit, overheat, and short circuit. With features like pre-charge circuits, brake outputs, directionally based inhibits, you’re sure to find a drive to fit your needs.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969419586,"sku":"DCR300-20","price":355.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/dcr300-20.png?v=1766416276"},{"product_id":"mgc403-11-line-voltage-dc-drive-230-vac-input-0-180-vac-output-1-25-1-4-hp-open-chassis-pmdc-brushed-motors","title":"American Controls MGC403-11, Line Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/25-1\/4 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eMGC403-11, Line Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/25-1\/4 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe MGC403 Series is one of the most feature-rich 4Q regen drives on the market. Ideal for OEMs and end users looking for a powerful, but simple to apply regenerative control. Users can easily select from a variety of operational modes including speed, torque, cycling and positioning. The built-in Motor Overload Protection meets UL 61800-5-1 and negates the need for external devices that will be required by other drives. With our standard mounting pattern and footprint, error codes for easy trouble shooting, and factory mounted fuse option, the MCC403 is designed for both new and retro-fit applications. With an on-board microprocessor, the MGC Series can also be fitted with custom programming to suite an OEMs need as well as provide Modbus communication. The MGC Series combines functionality and efficiency with affordability.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969452354,"sku":"MGC403-11","price":331.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/mgc403-11.jpg?v=1766416277"},{"product_id":"mhs403-1-5","title":"American Controls MHS403-1.5, Line Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/4-2 Hp, Open Chassis, Field Wound Brushed Motors","description":"\u003cp\u003eMHS403-1.5, Line Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/4-2 Hp, Open Chassis, Field Wound Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe MHS series of drives adds to our already feature rich 1Q offering. With an isolated input that can accept a grounded 4-20 mA or 0-10 VDC signal, Programmable Logic Control (PLC) or motion card connectivity is easy. The addition of cage clamp terminals on all logic connections, and power connections on some models, makes installation a breeze. Aside from having all the standard calibration adjustments offered by our other 1Q drives, the MHS series also offers start\/stop push button inputs, dual voltage power capability, on-board fusing, and tachogenerator feedback inputs for even more precise control of motor speed. With a wide 1\/20 - 5 horsepower range, this series can control almost any PM or shunt-wound motor.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969485122,"sku":"MHS403-1.5","price":560.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/403-10-dc.jpg?v=1766416277"},{"product_id":"mhs403-10-line-voltage-dc-drive-230-vac-input-0-180-vac-output-1-4-2-hp-open-chassis-field-wound-brushed-motors","title":"American Controls MHS403-10, Line Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/4-2 Hp, Open Chassis, Field Wound Brushed Motors","description":"\u003cp\u003eMHS403-10, Line Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/4-2 Hp, Open Chassis, Field Wound Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe MHS series of drives adds to our already feature rich 1Q offering. With an isolated input that can accept a grounded 4-20 mA or 0-10 VDC signal, Programmable Logic Control (PLC) or motion card connectivity is easy. The addition of cage clamp terminals on all logic connections, and power connections on some models, makes installation a breeze. Aside from having all the standard calibration adjustments offered by our other 1Q drives, the MHS series also offers start\/stop push button inputs, dual voltage power capability, on-board fusing, and tachogenerator feedback inputs for even more precise control of motor speed. With a wide 1\/20 - 5 horsepower range, this series can control almost any PM or shunt-wound motor.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969517890,"sku":"MHS403-10","price":560.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/403-10-dc_1.jpg?v=1766416278"},{"product_id":"cmc100-20-dc-115-230-vac-input-15-vac-output-1-0-amp-at-30-vdc-open-chassis-external-current-limit-alarm","title":"American Controls CMC100-20, DC, 115\/230 Vac Input, 15 Vac Output, 1.0 amp @ 30 VDC, Open Chassis, External Current Limit Alarm.","description":"\u003cp\u003eCMC100-20, DC, 115\/230 Vac Input, 15 Vac Output, 1.0 amp @ 30 VDC, Open Chassis, External Current Limit Alarm.\u003c\/p\u003e\n\n\u003cp\u003eThe CMC series is a stand-alone accessory card that can provide a current limit alarm. Compatible with any DC motor controller, the card is wired in series with a DC motor. Using a jumper to set a base current limit trip point, an on-board OFFSET trim pot can be used to finely adjust the trip point. A TIME DELAY trim pot can be used to determine how long the motor’s amperage draw must be above the trip point before determining it’s truly a fault scenario. This prevents false alarms from startup draws and momentary surges. When the card determines it’s a trip, it will toggle a N.O. output closed and another N.C. output open. These contacts are to be used as switches to turn on or off other circuits, such as LEDs, relays, or speakers. The card can be set to stay tripped or can be set to automatically reset (un-trip) once current falls below an adjustable HYSTERESIS setting. This feature rich current sensing module is a valuable tool in new and existing systems where an added level of monitoring and protection is required.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969550658,"sku":"CMC100-20","price":291.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/cmc100-20.jpg?v=1766416279"},{"product_id":"cmc100-30-dc-115-230-vac-input-15-vac-output-1-0-amp-at-30-vdc-open-chassis-external-current-limit-alarm","title":"American Controls CMC100-30, DC, 115\/230 Vac Input, 15 Vac Output, 1.0 amp @ 30 VDC, Open Chassis, External Current Limit Alarm.","description":"\u003cp\u003eCMC100-30, DC, 115\/230 Vac Input, 15 Vac Output, 1.0 amp @ 30 VDC, Open Chassis, External Current Limit Alarm.\u003c\/p\u003e\n\n\u003cp\u003eThe CMC series is a stand-alone accessory card that can provide a current limit alarm. Compatible with any DC motor controller, the card is wired in series with a DC motor. Using a jumper to set a base current limit trip point, an on-board OFFSET trim pot can be used to finely adjust the trip point. A TIME DELAY trim pot can be used to determine how long the motor’s amperage draw must be above the trip point before determining it’s truly a fault scenario. This prevents false alarms from startup draws and momentary surges. When the card determines it’s a trip, it will toggle a N.O. output closed and another N.C. output open. These contacts are to be used as switches to turn on or off other circuits, such as LEDs, relays, or speakers. The card can be set to stay tripped or can be set to automatically reset (un-trip) once current falls below an adjustable HYSTERESIS setting. This feature rich current sensing module is a valuable tool in new and existing systems where an added level of monitoring and protection is required.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969583426,"sku":"CMC100-30","price":272.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/cmc100-20_1_964fed90-cab7-47a5-9d08-76d3173bd056.jpg?v=1766416280"},{"product_id":"dcr600-250-low-voltage-dc-drive-48-vac-input-0-48-vac-output-1-7-1-2-hp-open-chassis-pmdc-brushed-motors","title":"American Controls DCR600-250, Low Voltage DC Drive, 48 Vac Input, 0-48 Vac Output, 1-7 1\/2 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eDCR600-250, Low Voltage DC Drive, 48 Vac Input, 0-48 Vac Output, 1-7 1\/2 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe DCR series are microprocessor based, low voltage PWM drives that are capable of braking and reversing regeneratively. The microprocessor allows for custom programming to fit any OEMs custom needs, sometimes eliminating the need for a PLC and\/or sensors. They can even be programmed for use in the field without trimmer potentiometers, creating a simple install and a level of security for OEMs. Some models contain a “sleep mode” which extends battery life, and some contain a Fault LED with a built in flashing code for under voltage, over voltage, current limit, overheat, and short circuit. With features like pre-charge circuits, brake outputs, directionally based inhibits, you’re sure to find a drive to fit your needs.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969616194,"sku":"DCR600-250","price":1032.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/dcr600-250_1_08d05d59-c24d-4c03-8308-ae4aac5452e0.jpg?v=1766416280"},{"product_id":"dcr600-6-low-voltage-dc-drive-48-vac-input-0-48-vac-output-1-25-1-8-hp-open-chassis-pmdc-brushed-motors","title":"American Controls DCR600-6, Low Voltage DC Drive, 48 Vac Input, 0-48 Vac Output, 1-25-1\/8 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eDCR600-6, Low Voltage DC Drive, 48 Vac Input, 0-48 Vac Output, 1-25-1\/8 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe DCR series are microprocessor based, low voltage PWM drives that are capable of braking and reversing regeneratively. The microprocessor allows for custom programming to fit any OEMs custom needs, sometimes eliminating the need for a PLC and\/or sensors. They can even be programmed for use in the field without trimmer potentiometers, creating a simple install and a level of security for OEMs. Some models contain a “sleep mode” which extends battery life, and some contain a Fault LED with a built in flashing code for under voltage, over voltage, current limit, overheat, and short circuit. With features like pre-charge circuits, brake outputs, directionally based inhibits, you’re sure to find a drive to fit your needs.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969648962,"sku":"DCR600-6","price":215.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/dcr600-6.png?v=1766416281"},{"product_id":"dcr600-60-low-voltage-dc-drive-48-vac-input-0-48-vac-output-1-6-1-1-3-hp-open-chassis-pmdc-brushed-motors","title":"American Controls DCR600-60, Low Voltage DC Drive, 48 Vac Input, 0-48 Vac Output, 1\/6-1 1\/3 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eDCR600-60, Low Voltage DC Drive, 48 Vac Input, 0-48 Vac Output, 1\/6-1 1\/3 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe DCR600-60 is a microprocessor based, low voltage PWM drive for brushed DC motors up to 48 VDC, rated for 30 amps continuous operation or 60 amps for one minute. They are regenerative controls capable of braking or reversing on-the-fly without the use of braking resistors or motor lead swapping. The drives are equipped with a brake output that can be used to power electro-mechanical brake or an external run status LED. There are two on-board LEDs that are used to communicate run status and fault conditions, while jumpers are used to select between Speed or Torque mode operation as well as unidirectional or bidirectional control with a 0 – 5 VDC analog signal. Protective circuitry helps shield the drive from shorts on the armature output and a pre-charge circuit limits in-rush current to protect the power contacts. The microprocessor allows for custom programming to fit various OEMs custom needs, potentially eliminating the need for a PLC and supporting devices. As an example, drives can be programmed for use in the field without trim pots, saving the customer time and money on installation, calibration, and field support.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969714498,"sku":"DCR600-60","price":570.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/dcr600-60.png?v=1766416282"},{"product_id":"lgc400-10-vrt-line-voltage-dc-drive-230-vac-input-180-vac-output-1-4-2-hp-open-chassis-field-wound-brushed-motors","title":"American Controls LGC400-10-VRT, Line Voltage DC Drive, 230 Vac Input, 180 Vac Output, 1\/4-2 Hp, Open Chassis, Field Wound Brushed Motors.","description":"\u003cp\u003eLGC400-10-VRT, Line Voltage DC Drive, 230 Vac Input, 180 Vac Output, 1\/4-2 Hp, Open Chassis, Field Wound Brushed Motors.\u003c\/p\u003e\n\n\u003cp\u003eThe LGC series is our most widely used series for general purpose 90\/180 VDC brushed DC motor applications. This compact, non-filtered SCR drive series offers many user friendly adjustments. With the use of the on-board trim pots you can quickly set maximum speed, acceleration rate, deceleration rate, current limit, speed regulation, and minimum speed of your motor. With abilities to accept 115 or 230 VAC single phase power, run permanent magnet or field-wound motors, and by offering many NEMA packaging options, the LGC series can easily satisfy most of your motor driving needs.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969747266,"sku":"LGC400-10-VRT","price":374.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/lgc400-10-vrt.jpg?v=1766416283"},{"product_id":"pwp101-5","title":"American Controls PWP101-5, Low Voltage DC Drive, 115 Vac Input, 0-90\/130 Vac Output, 1\/4-1\/2 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003ePWP101-5, Low Voltage DC Drive, 115 Vac Input, 0-90\/130 Vac Output, 1\/4-1\/2 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe PWP series is an economical and compact solution for those who seek the benefits of Pulse Width Modulation (PWM) technology. The almost pure DC voltage provided by the PWP series allows for quieter and cooler operation of any permanent magnet DC motor. The 1.05 form factor of the DC output extends motor brush life and allows for an increase in motor torque throughout the speed range. With a full range of adjustments, such as Maximum Speed, Current Limit, IR Compensation, and available with an isolated input, the PWP series can easily be calibrated to run a wide range of motors from 1\/100 to 1 HP. Because of PWMs superiority over SCR technology, this series is the perfect choice for any application where extending motor life is desired.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969812802,"sku":"PWP101-5","price":338.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/pwp101-5_3895749b-9b1a-42d5-a942-e68957fec755.jpg?v=1766416283"},{"product_id":"pwp101-2-low-voltage-dc-drive-115-vac-input-0-90-130-vac-output-1-20-1-6-hp-open-chassis-pmdc-brushed-motors","title":"American Controls PWP101-2, Low Voltage DC Drive, 115 Vac Input, 0-90\/130 Vac Output, 1\/20-1\/6 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003ePWP101-2, Low Voltage DC Drive, 115 Vac Input, 0-90\/130 Vac Output, 1\/20-1\/6 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe PWP series is an economical and compact solution for those who seek the benefits of Pulse Width Modulation (PWM) technology. The almost pure DC voltage provided by the PWP series allows for quieter and cooler operation of any permanent magnet DC motor. The 1.05 form factor of the DC output extends motor brush life and allows for an increase in motor torque throughout the speed range. With a full range of adjustments, such as Maximum Speed, Current Limit, IR Compensation, and available with an isolated input, the PWP series can easily be calibrated to run a wide range of motors from 1\/100 to 1 HP. Because of PWMs superiority over SCR technology, this series is the perfect choice for any application where extending motor life is desired\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969845570,"sku":"PWP101-2","price":330.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/pwp101-5_1.jpg?v=1766416284"},{"product_id":"pwp101-10-low-voltage-dc-drive-115-vac-input-0-90-130-vac-output-1-4-1-hp-open-chassis-pmdc-brushed-motors","title":"American Controls PWP101-10, Low Voltage DC Drive, 115 Vac Input, 0-90\/130 Vac Output, 1\/4-1 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003ePWP101-10, Low Voltage DC Drive, 115 Vac Input, 0-90\/130 Vac Output, 1\/4-1 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe PWP series is an economical and compact solution for those who seek the benefits of Pulse Width Modulation (PWM) technology. The almost pure DC voltage provided by the PWP series allows for quieter and cooler operation of any permanent magnet DC motor. The 1.05 form factor of the DC output extends motor brush life and allows for an increase in motor torque throughout the speed range. With a full range of adjustments, such as Maximum Speed, Current Limit, IR Compensation, and available with an isolated input, the PWP series can easily be calibrated to run a wide range of motors from 1\/100 to 1 HP. Because of PWMs superiority over SCR technology, this series is the perfect choice for any application where extending motor life is desired.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969878338,"sku":"PWP101-10","price":355.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/pwp101-5_1_1.jpg?v=1766416285"},{"product_id":"pwp100-5-low-voltage-dc-drive-115-vac-input-0-90-130-vac-output-1-4-1-2-hp-open-chassis-pmdc-brushed-motors","title":"American Controls PWP100-5, Low Voltage DC Drive, 115 Vac Input, 0-90\/130 Vac Output, 1\/4-1\/2 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003ePWP100-5, Low Voltage DC Drive, 115 Vac Input, 0-90\/130 Vac Output, 1\/4-1\/2 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe PWP series is an economical and compact solution for those who seek the benefits of Pulse Width Modulation (PWM) technology. The almost pure DC voltage provided by the PWP series allows for quieter and cooler operation of any permanent magnet DC motor. The 1.05 form factor of the DC output extends motor brush life and allows for an increase in motor torque throughout the speed range. With a full range of adjustments, such as Maximum Speed, Current Limit, IR Compensation, and available with an isolated input, the PWP series can easily be calibrated to run a wide range of motors from 1\/100 to 1 HP. Because of PWMs superiority over SCR technology, this series is the perfect choice for any application where extending motor life is desired.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969911106,"sku":"PWP100-5","price":262.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/pwp100-5.jpg?v=1766416286"},{"product_id":"pwp100-2-qdt-low-voltage-dc-drive-115-vac-input-0-90-130-vac-output-1-20-1-5-1-4-hp-open-chassis-pmdc-brushed-motors","title":"American Controls PWP100-2-QDT, Low Voltage DC Drive, 115 Vac Input, 0-90\/130 Vac Output, 1\/20 - 1\/5 (1\/4) Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003ePWP100-2-QDT, Low Voltage DC Drive, 115 Vac Input, 0-90\/130 Vac Output, 1\/20 - 1\/5 (1\/4) Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe PWP series is an economical and compact solution for those who seek the benefits of Pulse Width Modulation (PWM) technology. The almost pure DC voltage provided by the PWP series allows for quieter and cooler operation of any permanent magnet DC motor. The 1.05 form factor of the DC output extends motor brush life and allows for an increase in motor torque throughout the speed range. With a full range of adjustments, such as Maximum Speed, Current Limit, IR Compensation, and available with an isolated input, the PWP series can easily be calibrated to run a wide range of motors from 1\/100 to 1 HP. Because of PWMs superiority over SCR technology, this series is the perfect choice for any application where extending motor life is desired.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969943874,"sku":"PWP100-2-QDT","price":282.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/pwp100-2-qdt_8ea6eaa8-3758-4187-8b7e-15ee01fbd881.jpg?v=1766416286"},{"product_id":"pwp100-10-low-voltage-dc-drive-115-vac-input-0-90-130-vac-output-1-4-1-hp-open-chassis-pmdc-brushed-motors","title":"American Controls PWP100-10, Low Voltage DC Drive, 115 Vac Input, 0-90\/130 Vac Output, 1\/4-1 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003ePWP100-10, Low Voltage DC Drive, 115 Vac Input, 0-90\/130 Vac Output, 1\/4-1 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe PWP series is an economical and compact solution for those who seek the benefits of Pulse Width Modulation (PWM) technology. The almost pure DC voltage provided by the PWP series allows for quieter and cooler operation of any permanent magnet DC motor. The 1.05 form factor of the DC output extends motor brush life and allows for an increase in motor torque throughout the speed range. With a full range of adjustments, such as Maximum Speed, Current Limit, IR Compensation, and available with an isolated input, the PWP series can easily be calibrated to run a wide range of motors from 1\/100 to 1 HP. Because of PWMs superiority over SCR technology, this series is the perfect choice for any application where extending motor life is desired.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663969976642,"sku":"PWP100-10","price":274.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/pwp100-5_2_f082060f-0d42-4f3e-a160-8e56ff93514f.jpg?v=1766416287"},{"product_id":"pwm401-5-low-voltage-dc-drive-230-vac-input-0-180-240-vac-output-1-2-1-hp-open-chassis-pmdc-brushed-motors","title":"American Controls PWM401-5, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/2-1 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003ePWM401-5, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/2-1 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe flagship of our Pulse Width Modulation family, the PWM series combines the most sought after features and options all in one package. With its auto ranging switch mode power supply, the need for selecting AC power input modes is no longer needed. Available with isolated inputs, this series can easily be incorporated into applications where non-isolated 0-5 VDC command signals are present. Offered with the full gamut of adjustment trim pots, the PWM series can be fine tuned to run almost any PMDC motor in the 1\/20th to 2 HP range, and with an industry wide accepted footprint, these drives are well suited for applications where a compact and full featured pulse width modulated drive is required.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663970009410,"sku":"PWM401-5","price":393.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/pwm401-5.jpg?v=1766416288"},{"product_id":"pwm401-2-low-voltage-dc-drive-230-vac-input-0-180-240-vac-output-1-10-1-3-1-2-hp-open-chassis-pmdc-brushed-motors","title":"American Controls PWM401-2, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/10 - 1\/3 (1\/2) Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003ePWM401-2, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/10 - 1\/3 (1\/2) Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe flagship of our Pulse Width Modulation family, the PWM series combines the most sought after features and options all in one package. With its auto ranging switch mode power supply, the need for selecting AC power input modes is no longer needed. Available with isolated inputs, this series can easily be incorporated into applications where non-isolated 0-5 VDC command signals are present. Offered with the full gamut of adjustment trim pots, the PWM series can be fine tuned to run almost any PMDC motor in the 1\/20th to 2 HP range, and with an industry wide accepted footprint, these drives are well suited for applications where a compact and full featured pulse width modulated drive is required.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663970042178,"sku":"PWM401-2","price":371.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/pwm401-5_1_cc4acdd7-6178-4607-a643-14904ea20744.jpg?v=1766416289"},{"product_id":"pwm401-10-low-voltage-dc-drive-230-vac-input-0-180-240-vac-output-1-2-2-3-hp-open-chassis-pmdc-brushed-motors","title":"American Controls PWM401-10, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/2 - 2 (3) Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003ePWM401-10, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/2 - 2 (3) Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe flagship of our Pulse Width Modulation family, the PWM series combines the most sought after features and options all in one package. With its auto ranging switch mode power supply, the need for selecting AC power input modes is no longer needed. Available with isolated inputs, this series can easily be incorporated into applications where non-isolated 0-5 VDC command signals are present. Offered with the full gamut of adjustment trim pots, the PWM series can be fine tuned to run almost any PMDC motor in the 1\/20th to 2 HP range, and with an industry wide accepted footprint, these drives are well suited for applications where a compact and full featured pulse width modulated drive is required.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663970074946,"sku":"PWM401-10","price":529.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/pwm401-10.jpg?v=1766416290"},{"product_id":"pwm400-5-low-voltage-dc-drive-230-vac-input-0-180-240-vac-output-1-4-1-2-hp-open-chassis-pmdc-brushed-motors","title":"American Controls PWM400-5, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/4-1\/2 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003ePWM400-5, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/4-1\/2 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe flagship of our Pulse Width Modulation family, the PWM series combines the most sought after features and options all in one package. With its auto ranging switch mode power supply, the need for selecting AC power input modes is no longer needed. Available with isolated inputs, this series can easily be incorporated into applications where non-isolated 0-5 VDC command signals are present. Offered with the full gamut of adjustment trim pots, the PWM series can be fine tuned to run almost any PMDC motor in the 1\/20th to 2 HP range, and with an industry wide accepted footprint, these drives are well suited for applications where a compact and full featured pulse width modulated drive is required.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663970107714,"sku":"PWM400-5","price":326.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/pwm400-5.jpg?v=1766416291"},{"product_id":"pwm400-2-low-voltage-dc-drive-230-vac-input-0-180-240-vac-output-1-10-1-3-1-2-hp-open-chassis-pmdc-brushed-motors","title":"American Controls PWM400-2, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/10 - 1\/3 (1\/2)Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003ePWM400-2, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/10 - 1\/3 (1\/2)Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe flagship of our Pulse Width Modulation family, the PWM series combines the most sought after features and options all in one package. With its auto ranging switch mode power supply, the need for selecting AC power input modes is no longer needed. Available with isolated inputs, this series can easily be incorporated into applications where non-isolated 0-5 VDC command signals are present. Offered with the full gamut of adjustment trim pots, the PWM series can be fine tuned to run almost any PMDC motor in the 1\/20th to 2 HP range, and with an industry wide accepted footprint, these drives are well suited for applications where a compact and full featured pulse width modulated drive is required.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663970140482,"sku":"PWM400-2","price":310.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/pwm400-2.jpg?v=1766416291"},{"product_id":"pwm400-10-low-voltage-dc-drive-230-vac-input-0-180-240-vac-output-1-2-2-3-hp-open-chassis-pmdc-brushed-motors","title":"American Controls PWM400-10, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/2 - 2 (3) Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003ePWM400-10, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/2 - 2 (3) Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe flagship of our Pulse Width Modulation family, the PWM series combines the most sought after features and options all in one package. With its auto ranging switch mode power supply, the need for selecting AC power input modes is no longer needed. Available with isolated inputs, this series can easily be incorporated into applications where non-isolated 0-5 VDC command signals are present. Offered with the full gamut of adjustment trim pots, the PWM series can be fine tuned to run almost any PMDC motor in the 1\/20th to 2 HP range, and with an industry wide accepted footprint, these drives are well suited for applications where a compact and full featured pulse width modulated drive is required.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663970173250,"sku":"PWM400-10","price":471.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/pwm400-10_69f84313-024e-4438-97bf-10948394985b.jpg?v=1766416292"},{"product_id":"rga400-10-low-voltage-dc-drive-230-vac-input-0-180-vac-output-1-4-2-hp-open-chassis-pmdc-brushed-motors","title":"American Controls RGA400-10, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/4-2 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eRGA400-10, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/4-2 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe RGA series of 4Q drives is well suited for applications that require the control of overhauling loads, frequent reversing or breaking. With on-board fusing and cage clamp power and logic terminals, installation has been made simple. Available in either open chassis style or in a NEMA 4X enclosure, the RGA series can be used in a wide range of environments. With the available field supply for shunt-wound motors, full assortment of adjustments that are standard on all our 4Q drives, and optional factory installed isolation module, the RGA series is a flexible and well equipped member of our 4Q family of drives.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663970206018,"sku":"RGA400-10","price":702.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/rga400-10.jpg?v=1766416293"},{"product_id":"rga400-3-low-voltage-dc-drive-230-vac-input-0-180-vac-output-1-10-1-2-hp-open-chassis-pmdc-brushed-motors","title":"American Controls RGA400-3, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/10-1\/2 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eRGA400-3, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/10-1\/2 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe RGA series of 4Q drives is well suited for applications that require the control of overhauling loads, frequent reversing or breaking. With on-board fusing and cage clamp power and logic terminals, installation has been made simple. Available in either open chassis style or in a NEMA 4X enclosure, the RGA series can be used in a wide range of environments. With the available field supply for shunt-wound motors, full assortment of adjustments that are standard on all our 4Q drives, and optional factory installed isolation module, the RGA series is a flexible and well equipped member of our 4Q family of drives.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663970238786,"sku":"RGA400-3","price":681.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/rga400-10_1.jpg?v=1766416294"},{"product_id":"pwl400-10-low-voltage-dc-drive-230-vac-input-0-180-240-vac-output-1-2-2-3-hp-open-chassis-pmdc-brushed-motors","title":"American Controls PWL400-10, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/2 - 2 (3) Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003ePWL400-10, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/2 - 2 (3) Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe PWL series adds to the versatility of our PWM offering by adding field voltage outputs for shunt-wound motors. With on-board selector switches, this series can easily be setup to accept 115 VAC or 230 VAC power. This full featured series comes with on-board fusing and cage clamp terminals to make installation simple and quick. Available in an open chassis style or NEMA 4X for applications that require protection from moisture. The almost pure DC output of the PWL series allows motors to run more efficiently and at lower speeds while achieving full torque than with the use of SCR type drives. With a wide selection of models that can run motors from 1\/20 HP all the way up to 3 HP, you’re sure to find a drive that will satisfy your needs.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663970337090,"sku":"PWL400-10","price":685.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/pwl400-10.jpg?v=1766416295"},{"product_id":"pwl400-3-low-voltage-dc-drive-230-vac-input-0-180-240-vac-output-1-10-1-2-hp-open-chassis-pmdc-brushed-motors","title":"American Controls PWL400-3, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/10 - 1\/2 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003ePWL400-3, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/10 - 1\/2 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe PWL series adds to the versatility of our PWM offering by adding field voltage outputs for shunt-wound motors. With on-board selector switches, this series can easily be setup to accept 115 VAC or 230 VAC power. This full featured series comes with on-board fusing and cage clamp terminals to make installation simple and quick. Available in an open chassis style or NEMA 4X for applications that require protection from moisture. The almost pure DC output of the PWL series allows motors to run more efficiently and at lower speeds while achieving full torque than with the use of SCR type drives. With a wide selection of models that can run motors from 1\/20 HP all the way up to 3 HP, you’re sure to find a drive that will satisfy your needs.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663970402626,"sku":"PWL400-3","price":474.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/pwl400-3.jpg?v=1766416297"},{"product_id":"pwl400-5-low-voltage-dc-drive-230-vac-input-0-180-240-vac-output-1-4-1-1-1-2-hp-open-chassis-pmdc-brushed-motors","title":"American Controls PWL400-5, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/4 - 1 (1 1\/2) Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003ePWL400-5, Low Voltage DC Drive, 230 Vac Input, 0-180\/240 Vac Output, 1\/4 - 1 (1 1\/2) Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe PWL series adds to the versatility of our PWM offering by adding field voltage outputs for shunt-wound motors. With on-board selector switches, this series can easily be setup to accept 115 VAC or 230 VAC power. This full featured series comes with on-board fusing and cage clamp terminals to make installation simple and quick. Available in an open chassis style or NEMA 4X for applications that require protection from moisture. The almost pure DC output of the PWL series allows motors to run more efficiently and at lower speeds while achieving full torque than with the use of SCR type drives. With a wide selection of models that can run motors from 1\/20 HP all the way up to 3 HP, you’re sure to find a drive that will satisfy your needs\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663970435394,"sku":"PWL400-5","price":563.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/pwl400-5.jpg?v=1766416297"},{"product_id":"rga403-3-low-voltage-dc-drive-230-vac-input-0-180-vac-output-1-4-2-hp-open-chassis-pmdc-brushed-motors","title":"American Controls RGA403-3, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/4-2 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eRGA403-3, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/10 - 1\/2 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe RGA series of 4Q drives is well suited for applications that require the control of overhauling loads, frequent reversing or breaking. With on-board fusing and cage clamp power and logic terminals, installation has been made simple. Available in either open chassis style or in a NEMA 4X enclosure, the RGA series can be used in a wide range of environments. With the available field supply for shunt-wound motors, full assortment of adjustments that are standard on all our 4Q drives, and optional factory installed isolation module, the RGA series is a flexible and well equipped member of our 4Q family of drives.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663970500930,"sku":"RGA403-3","price":919.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/rga403-10_1_3b470844-80d7-4d92-9094-c5434f767fbb.jpg?v=1766416298"},{"product_id":"rgm400-1-5","title":"American Controls RGM400-1.5, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/10 - 1\/4 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eRGM400-1.5, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/10 - 1\/4 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe RGM series is a full featured regenerative SCR type drive series designed specifically for demanding applications where quickly stopping or reversing a PMDC motor is a requirement. With a widely used industry footprint standard, these compact 4Q drives eliminate the need for bulky mechanical relays or switches to reverse motor direction. As with all our 4Q drives, these units come standard with user adjustable trim pots for Max Speed, FWD\/REV Torque, Acceleration, Deceleration, DB, Min Speed, Tach, and IR Comp. With these adjustments, a drive can easily be tuned to run almost any PMDC motor in the 1\/20th to 2 HP range. Also available on the RGM series is a factory installed isolation module that allows the drive to be controlled via a non-isolated 4-20 mA or 0 to ±10 VDC command signal. With many user selectable stopping or enabling modes and Tachogenerator feedback, the RGM series is a versatile drive that can satisfy your reversing and control needs.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663970533698,"sku":"RGM400-1.5","price":470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/rgm400-15.jpg?v=1766416299"},{"product_id":"rgm400-10-low-voltage-dc-drive-230-vac-input-0-180-vac-output-1-4-2-hp-open-chassis-pmdc-brushed-motors","title":"American Controls RGM400-10, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/4-2 Hp, Open Chassis, PMDC Brushed Motors","description":"\u003cp\u003eRGM400-10, Low Voltage DC Drive, 230 Vac Input, 0-180 Vac Output, 1\/4-2 Hp, Open Chassis, PMDC Brushed Motors\u003c\/p\u003e\n\n\u003cp\u003eThe RGM series is a full featured regenerative SCR type drive series designed specifically for demanding applications where quickly stopping or reversing a PMDC motor is a requirement. With a widely used industry footprint standard, these compact 4Q drives eliminate the need for bulky mechanical relays or switches to reverse motor direction. As with all our 4Q drives, these units come standard with user adjustable trim pots for Max Speed, FWD\/REV Torque, Acceleration, Deceleration, DB, Min Speed, Tach, and IR Comp. With these adjustments, a drive can easily be tuned to run almost any PMDC motor in the 1\/20th to 2 HP range. Also available on the RGM series is a factory installed isolation module that allows the drive to be controlled via a non-isolated 4-20 mA or 0 to ±10 VDC command signal. With many user selectable stopping or enabling modes and Tachogenerator feedback, the RGM series is a versatile drive that can satisfy your reversing and control needs.\u003c\/p\u003e","brand":"Industrial Motors","offers":[{"title":"Default Title","offer_id":51663970599234,"sku":"RGM400-10","price":470.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/files\/rgm400-15_1.jpg?v=1766416300"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/2298\/4002\/collections\/9668-2t_1.jpg?v=1765798260","url":"https:\/\/industrialmotors.com\/collections\/american-controls.oembed?page=10","provider":"Industrial Motors","version":"1.0","type":"link"}