JMM4114T, 50 Hp, 3600 Rpm, 326JM FR, 230/460 Vac, 3 PH, TEFC, Foot Mounted, Close-Coupled Pump Motor

** This motor has been replaced by Model# EJMM4114T**
JMM4114T, 50 Hp, 3600 Rpm, 326JM FR, 230/460 Vac, 3 PH, TEFC, Foot Mounted, Close-Coupled Pump Motor.

Enclosure TEFC

Frame 326JM

Frame Material IRON

Frequency 60 Hz

Output @ Frequency 50.000 HP @ 60 HZ

Phase 3

Synchronous Speed @ Frequency 3600 RPM @ 60 HZ

Voltage @ Freqeuncy 460.0 V @ 60 HZ
230.0 V @ 60 HZ

XP Division NOT APPLICABLE

Agency Approvals CSA
UR

Ambient Temperature 40 °C

Auxillary Box NO AUXILLARY BOX

Auxillary Box Lead Termination NONE

Base Indicator RG

Bearing Grease Type POLYREX EM (-20F +300F)

Blower NONE

Current @ Voltage 112.000 A @ 230.0 V
126.000 A @ 208.0 V
56.000 A @ 460.0 V

Design Code B

Drip Cover NO DRIP COVER

Duty Rating CONT

Efficiency @ 100% Load 92.4 %

Electrically Isolated Bearing NO ELECTRICALLY ISOLATED

Feedback Device NO FEEDBACK

High Voltage Full Load Amps 56.0 a

Front Face Code STANDARD

Front Shaft Indicator NONE

Heater Indicator NO HEATER

Insulation Class F

Inverter Code NOT INVERTER

KVA Code H

Lifting Lugs STD LIFTING LUGS

Locked Bearing Indicator LOCKED BEARING

Motor Lead Exit KO BOX

Motor Lead Termination FLYING LEADS

Motor Lead Quantity/Wire Size 9 @ 8 AWG

Motor Type 1064M

Mounting Arrangement F1

Number of Poles 2

Overall Length 30.64 IN

Power Factor 90

Product Family GENERAL PURPOSE

Pulley End Bearing Type BALL BEARING

Pulley Face Code C-FACE

Pulley Shaft Indicator TAPPED & KEY

Rodent Screen NO RODENT SCREEN

Service Factor 1.15

Shaft Diameter 1.250 IN

Shaft Extension Location PULLEY END

Shaft Ground Indicator NO SHAFT GROUNDING

Shaft Rotation REVERSIBLE

Shaft Slinger Indicator SHAFT SLINGER

Speed 3525 rpm

Speed Code SINGLE SPEED

Motor Standards NEMA

Starting Method DOL

Thermal Device - Bearing NONE

Thermal Device - Winding NONE

Vibration Sensor Indicator NO VIBRATION SENSOR

Winding Thermal 1 NONE

Winding Thermal 2 NONE