Baldor Electric JL3510A 1 Hp, 1800 Rpm, 56J Fr, 115/230 Vac, 1 PH, TEFC, Footless, Jet Pump Motor

JL3510A 1 Hp, 1800 Rpm, 56J Fr, 115/230 Vac, 1 PH, TEFC, Footless, Jet Pump Motor

Engineering Data

Out Put 1.000 hp
Phase 1
Synchronous Speed 1,800 rpm
Frequency 60.00 Hz
Voltage
115 V
230 V
Frame Material Steel
Frame 56J
XP Class and Group NONE
XP Division Not Applicable
Brand Baldor-Reliance
Agency Approvals
CSA
UR
Ambient Temperature 40 °C
Auxillary Box
No Auxillary Box
Auxillary Box Lead Termination
None
Base Indicator
No Mounting
Bearing Grease Type
POLYREX EM (-20F +300F)
Blower None
Current
12.4 A @ 115 V
6.2 A @ 230 V
Design Code L
Drip Cover
No Drip Cover
Duty Rating CONT
Efficiency @ 100% Load 67.0%
Electrically Isolated Bearing
Not Electrically Isolated
Feedback Device
No feedback
Front Face Code
Standard
Front Shaft Indicator
None
Heater Indicator
No heater
High Voltage Full Load Amps 6.2 A
Insulation Class F
Inverter Code Not inverter
KVA Code K
Lifting Lugs No Lifting Lugs
Locked Bearing Indicator Locked Bearing
Motor Lead Exit KO Box
Motor Lead Quantity/Wire Size
4 @ 18 AWG, A&J
Motor Lead Termination
Flying Leads
Motor Standards
NEMA
Motor Type
3528L
Number of Poles 4
Overall Length 13.74 in
Power Factor 68
Product Family General Purpose
Pulley End Bearing Type Ball
Pulley Face Code C-Face
Pulley Shaft Indicator Ext Thread
Rodent Screen None
Service Factor 1.00
Shaft Diameter 0.625 in
Shaft Extension Location
Pulley End Shaft Ground Indicator
No Shaft Grounding
Shaft Rotation
Fixed Opposite Standard
Shaft Slinger Indicator No Slinger
Speed 1,725 rpm
Speed Code Single Speed
Starting Method Direct on line
Thermal Device - Bearing NONE (OLD)
Thermal Device - Winding
Do not use Eve-Not Valiid
Vibration Sensor Indicator No Vibration Sensor
Winding Thermal 1
Automatic Thermal Overload
Winding Thermal 1 Location SB
Winding Thermal 2 None