Baldor Electric JL3514A 1 1/2 Hp, 1800 Rpm, 56J Fr, 115/230 Vac, 1 Ph, TEFC, Footless, Jet Pump Motor

JL3514A 1 1/2 Hp, 1800 Rpm, 56J Fr, 115/230 Vac, 1 Ph, TEFC, Footless, Jet Pump Motor

Engineering Data

Output 1.500 hp
Phase 1
Synchronous Speed 1,800 rpm
Frequency 60.00 Hz
Voltage
115 V
230 V
Frame Material Steel
Frame 56J
XP Class and Group
NONE
XP Division
Not Applicable
Brand Baldor-Reliance
Agency Approvals
CSA
UR
Ambient Temperature 40 °C
Auxillary Box No Auxillary Box
Auxillary Box Lead Termination None
Base Indicator No Mounting
Bearing Grease Type
POLYREX EM (-20F +300F)
Blower None
Current
16.0 A @ 115 V
7.8 A @ 208 V
8.0 A @ 230 V
Design Code L
Drip Cover No Drip Cover
Duty Rating CONT
Efficiency @ 100% Load 75.5%
Electrically Isolated Bearing
Not Electrically Isolated
Feedback Device No feedback
Front Face Code
Standard
Front Shaft Indicator
None
Heater Indicator
No heater
High Voltage Full Load Amps 8.0 A
Insulation Class F
Inverter Code
Not inverter
KVA Code J
Lifting Lugs No Lifting Lugs
Locked Bearing Indicator
Locked Bearing
Motor Lead Exit KO Box
Motor Lead Quantity/Wire Size 4 @ 16 AWG, A&J
Motor Lead Termination
Flying Leads
Motor Standards NEMA
Motor Type 3532LC
Number of Poles 4
Overall Length 14.62 in
Power Factor 80
Product Family
General Purpose
Pulley End Bearing Type Ball
Pulley Face Code C-Face
Pulley Shaft Indicator
Ext Thread
Rodent Screen
None
Service Factor 1.00
Shaft Diameter 0.625 in
Shaft Extension Location Pulley End
Shaft Ground Indicator No Shaft Grounding
Shaft Rotation
Fixed Opposite Standard
Shaft Slinger Indicator No Slinger
Speed 1,725 rpm
Speed Code
Single Speed
Starting Method
Direct on line
Thermal Device - Bearing NONE (OLD)
Thermal Device - Winding Do not use Eve-Not Valiid
Vibration Sensor Indicator No Vibration Sensor
Winding Thermal 1 Automatic Thermal Overload
Winding Thermal 1 Location SB
Winding Thermal 2 None